Desktop DIMM Installation
Note: Never apply pressure or handle the memory module on or around the Integrated Circuit (IC)! Always handle memory with both hands positioned at the upper-most corners of the Printed Circuit Board (PCB).
-
Disconnect the AC power cord and remove the computer cover. -
Prior to handling the memory module(s), always touch an unpainted and grounded metal object or use a grounded antistatic wrist strap to prevent electrostatic discharge (ESD). -
If necessary, remove pre-existing memory by pressing down on the lock/ejector tabs. The tabs are located at both ends of the memory socket. -
Align the memory module key(s) along with the memory socket keys(s) for proper installation. -
Press the memory into the socket until the tabs snap into place and secure the memory module. -
Replace the computer cover and plug in the AC power cord.
Notebook SO-DIMM Installation
Note: Never apply pressure or handle the memory module on or around the Integrated Circuit (IC)! Always handle memory with both hands positioned at the upper-most corners of the Printed Circuit Board (PCB).
-
Disconnect the AC power cord and remove the battery. -
Prior to handling the memory module(s), always touch an unpainted and grounded metal object or use a grounded antistatic wrist strap to prevent electrostatic discharge (ESD). -
If necessary, remove pre-existing memory by gently pulling the lock/ejector tabs (located on both sides of the memory socket) away from the memory module. The memory will unlock and pop-up 30 degrees for removal. -
Align the memory module key along with the memory socket key and insert the memory at a 30 degree angle. -
Rotate the memory downward until the lock/ejector tabs engage and click into place. -
Replace the battery and plug in the AC power cord.