Request Warranty Replacement - Reseller

Please read

1. This process is for U.S. Resellers Only. If you're not a reseller, please use the enduser form.

2. Original invoice is required for warranty replacements.

3. Warranty is for defective replacement product only.

4. Please verify all of the information before submitting your request. Any descrepancies may delay the process.

5. You must obtain an RMA number prior to returning your product. The RMA approval process generally takes 1-2 business days.

 

Your Contact Info
Shipping Address
Your HyperX Product(s)
Please choose the part number based on the capacity of your Flash product. The part number may also vary based on a specific design (i.e., DT109B/16GB and DT109K/16GB).
The correct information to place in this field relates to the number of actual memory products you are having a problem with.

If the product has multiple pieces in it (e.g., a USB drive with a separate cap and lanyard), this qualifies as a single product and you should enter "1" in this field.

Most memory products will contain a Revision Number. This number is used to help identify your product. Please refer to the illustration below to locate the Revision Number on your Kingston memory product.


Revision NumberWork Order Number


If you have difficulty locating the Revision Number, then look for a number in the following format:
    Example of Revision Number:     9911111-111.A11LF


Please note, the (99) and/or (LF) may not be present.
Attach proof of purchase
Documentation indicting place and date of purchase is required for warranty replacements.
Standard replacement:
Accept Terms & Conditions
Please correct the highlighted information above.

©2018 Kingston Technology Corporation, 17600 Newhope Street, Fountain Valley, CA 92708 USA. All rights reserved. All trademarks and registered trademarks are the property of their respective owners.